Pearl Packaging
Eachanari, Coimbatore, Tamil Nadu
GST No. 33AAFFP2979J1ZW
TrustSEAL Verified
Call 08048983503 77% Response Rate
SEND EMAIL
Product Details:
| Capacity | 500 Pouch/Hour |
| Automation Grade | Automatic |
|
Minimum Film Size |
W 50mm x L 30mm |
|
Maximum Film Size |
W 200mm x L 150mm |
|
Pouch Model |
Four Side Seal |
|
Hopper Capacity |
20 Ltr |
|
Filling Accuracy |
±0.5 to 2% |
|
Power |
2Kw/3 Phase |
|
Machine Weight |
300Kg |
|
Machine Dimension |
800 X 700 X 1800MM ( Approx) L X B X H |
|
Motor & Gear Box |
Transtech |
|
Air Compressor |
3HP |
|
Pneumatics |
SMC/CKD |
|
PLC |
Mitsubishi |
|
HMI |
Mitsubishi/ INVT |
Product Details:
| Capacity | 2000 Pouch/Hour |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
MODEL |
PP191 |
|
Minimum Film Size |
W 50mm x L 30mm |
|
Maximum Film Size |
W 200mm x L 150mm |
|
Pouch Model |
Center seal |
|
Hopper Capacity |
20 Ltr |
|
Filling Accuracy |
±0.5 to 2% |
|
Power |
2Kw/3 Phase |
|
Machine Weight |
300Kg |
|
Machine Dimension |
800 X 700 X 1800MM L X B X H |
|
Motor & Gear Box |
Transtech |
|
Air Compressor |
3HP |
|
Pneumatics |
Janatics |
|
PLC |
Delta |
|
HMI |
Delta |
|
VFD |
Delta |
|
PID Controller |
Omron |
|
Colour Mark Sensor |
DK 20 /Sick |
|
Electrical |
Standard |
|
Pneumatics Cylinder |
Janatics |
|
Heaters |
High-density |
|
MOC |
SS covering, Bucket – SS 304 |
|
Range |
50-1000g |
|
Product nature |
Granules and free flowing even sized products |
|
Speed |
Upto 15-20 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : Indian
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : Indian
|
No. of Heads |
single vibrator |
|
Controller |
PCB |
|
Pneumatic/Electrical -Mode of operation |
Electrical |
|
Input supply |
Single phase |
|
MOC |
SS covering |
|
Range |
10-1000 |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering, Bucket – SS 304 |
|
Range |
50-1000g |
|
Product nature |
Granules and free flowing even sized products |
|
Speed |
Up to 15-20 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
v Machine Type : Chute Type Total
v Filling System: Pneumatic Piston Filling
v Bagging System: Worm gear head with induction motor based
v Top & bottom Seal: Pneumatic Sealing
v Vertical Seal: Die Roller Sealing
|
No. of Heads |
2 – Double vibrator |
|
Controller |
PCB |
|
Pneumatic/Electrical -Mode of operation |
Electrical |
|
Input supply |
Single phase |
|
MOC |
SS covering |
|
Range |
10-1000 |
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : IndianSpecification:- PP191-Premium-171-2H-1000-DV-250S
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : Indian|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
Speed and Accuracy depends on the following parameters:
- Nature of the product and its behavior
- Pouch width sizes
- Proper operation and maintenance of machine
- Constant throughput/in-feed of product to the machine holding hopper
- Abnormal fluctuation of power and voltages
- Uninterrupted availability of service like air and power
- Depends on the bulk density variation of the product
- Nature of the product
- Ensuring minimum set weight in the hopper
Speed and Accuracy depends on the following parameters:
- Nature of the product and its behavior
- Pouch width sizes
- Proper operation and maintenance of machine
- Constant throughput/in-feed of product to the machine holding hopper
- Abnormal fluctuation of power and voltages
- Uninterrupted availability of service like air and power
- Depends on the bulk density variation of the product
- Nature of the product
- Ensuring minimum set weight in the hopper
Specification:- PP191-Premium-171-2H-1000-DV-250S
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : IndianProduct Details:
| Production Capacity | 40 BPM |
| Automation Grade | Automatic |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
Product Details:
| Production Capacity | 60 BPM |
| Automation Grade | Automatic |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
v Machine Type : Chute Type Total
v Filling System: Pneumatic Piston Filling
v Bagging System: Worm gear head with induction motor based
v Top & bottom Seal: Pneumatic Sealing
v Vertical Seal: Die Roller Sealing
|
Controller |
PLC |
|
Pneumatic/Electrical |
Pnuematic |
|
Controller - Filler |
Electrical, Pneumatic Piston Pump |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering |
|
Range |
10- 100ml |
|
Product nature |
Paste and viscous and highly liquids |
|
Speed |
Upto 15-25 ppm* |
|
Accuracy |
+/- 0.5-1% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
PP191 PNEUMATIC –CHUTE TYPE
|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |
Specification:- PP191-Premium-171-2H-1000-DV-250S
1. Controller : PLC
2. Pneumatic /Electrical : Pneumatic
3. Input Supply : Three Phase
4. Roll Width : Min 150mm/Max 480mm
5. Cut off Length : Min 100mm/Max 290mm
6. Imark Sensor : Yes
7. MOC: SS Covering, Bucket –SS 304
8. Range : 50g – 1000g
9. Product Name: Granules and free flowing even sized products
10. Speed: Up to 15ppm**( - Based on the grams and nature of products)
11. Accuracy : +/-0.5-1% of set weight* (*- Based on the grams and nature of
product)
12. Batch Cutting : Yes
13. Origin of supply : Indian|
Controller |
PLC (VEICHI) |
|
HMI |
VEICHI 7” |
|
Augur Motor |
Servo motor (VEICHI) |
|
Dragging Drive |
Mitsubishi |
|
Pneumatic/Electrical |
Pnuematic (Airtec) |
|
Input supply |
Three phase |
|
Roll width |
Min 150mm/ Max 480mm |
|
Cut off length |
Min 100mm/ Max 290mm |
|
Imark sensor |
Yes |
|
MOC |
SS covering and contact parts SS 304 |
|
Range |
50-1000g |
|
Product nature |
Fine and free flowing powders |
|
Speed |
Up to 10-15 ppm* |
|
Accuracy |
+/- 0.5-2% of set weight* |
|
Batch cutting |
Yes |
|
Origin of Supply |
Indian |